How do I use/clean/charge my SOURCE orb XL (v1 Travel Kit / Flosstradamus)?


  • Do not leave charge in extreme temperatures (Very Hot or Very Cold)
  • Do not use while charging.
  • Do not charge near moist environments.
  • Do not leave battery hanging by its cable. Make sure it is in a stable position.
  • Do not leave charging for extended periods of time.
  • Charge in a well ventilated area. 
  • When charging, allow the battery to charge completely prior to using. 

Watch a video on how to use your SOURCE orb XL

How to Prep and Power On

  1. Attach the SOURCE orb XL attachment to your battery.
  2. Unscrew the Top of your SOURCE orb XL attachment and screw your desired atomizer clockwise on the Base of the SOURCE orb XL attachment.
  3. Fill your atomizer with the material you'd like to vaporize.
  4. Screw the Top of your SOURCE orb XL.
  5. Twist the Variable Airflow System (VAS) to your desired airflow.

Using your SOURCE orb XL Premium Battery (2016 Travel Kit Kit)

  1. Once your battery powers up, twist the bottom voltage ring, and select your desired voltage.
  2. Once you have selected your desired temperature, you are ready to use your vape pen!

Using your SOURCE volt 30w Battery (Flosstradamus SOURCE orb XL)

Read the In-Depth Full Manual Here

  1. Press the Power Button (square) on your SOURCE volt 30w battery sequentially 5 times.
  2. Select your desired voltage by using the Up & Down arrows.

Using your Vape Pen

  1. Press and hold the Power Button once the desired temperature is selected, inhale slowly, and Experience True Taste.
  2. After taking a nice smooth hit, release the Power Button and continue taking smooth draws without the battery turned on after use for about 15 seconds. This will lower the temperature of the chamber, and will cool the concentrate inside, solidify it and make it less liquid, which will then prevent leaking.

How to Clean

Watch a video on how to clean your SOURCE orb XL

To optimize the performance of your SOURCE orb XL and its atomizers, we recommend cleaning thoroughly whenever needed.


  1. Make sure battery is not active and locked. 
  2. Unscrew the atomizer from the SOURCE orb XL attachment.
  3. Submerge the atomizer a container with 91% isopropyl alcohol.
  4. Shake softly for 3-5 minutes, and allow to air dry completely.


  1. Take apart your SOURCE orb XL attachment completely.
  2. With a cloth lightly soaked in 91% isopropyl alcohol, scrub the SOURCE orb XL attachment pieces to clean completely.


  1. Dip a cotton swab or cloth in 91% isopropyl alcohol, and clean the connection between the battery and the attachment regularly. 
  2. Keep this clean of sticky material, once it dries and it's connected to either an attachment or a charger, it might pull and damage your battery. 

How to Charge:

Watch a video on how to charge your SOURCE orb XL


SOURCE orb XL Premium Battery (2016 Travel Kit)

  1. Unscrew your battery from the SOURCE orb XL Attachment.
  2. Check the inside of your battery connector and clean any debris or material with a cotton swab.
  3. Screw your battery onto your eGo charging cable (Make sure it is dry and clean of any residue).
  4. Plug your charger into a wall charger.
  5. Your battery will light up and your charger will light red while charging.
  6. Your charger will turn solid green once fully charged (2-3 hours).

SOURCE volt 30w Battery (Flosstradamus SOURCE orb XL)

  1. Unscrew your SOURCE orb XL Attachment from your battery.
  2. Plug in a micro USB cable to the underside of the SOURCE volt 30w.
  3. Plug your cable into a wall charger.
  4. Your battery screen will read charging.
  5. Your screen will go blank once fully charged (2-3 hours).
Was this article helpful?
2 out of 2 found this helpful
Have more questions? Submit a request


Please sign in to leave a comment.