Follow

How do I use/clean/charge my SOURCE nail XL - Premium Kit?

How to Use

Watch a video on how to use your SOURCE nail XL

How to use as a Portable eNail

How to Fill Your Bubbler

  1. Remove the glass bubbler from the attachment (gently pull from the attachment).
  2. Pour 1/4 oz. of water into the mouthpiece, or until the bubbler is less than 1/4 full.
  3. If some water drops to the bottom chamber of the bubbler, that's ok, but you can tip forward slowly to let the excess water drip down.

How to Prep and Power On

  1. Attach the SOURCE nail XL attachment to your SOURCE nail XL Premium battery.
  2. With the glass bubbler removed and screw your desired SOURCE nail atomizer clockwise unto the SOURCE nail XL attachment.
  3. Replace the glass bubbler after it's filled with water.
  4. Press the Power Button on your SOURCE nail XL Premium battery sequentially 5 times to turn on.
  5. Press the Power Button 4 times quickly to cycle through the Temp Settings. 
    1. Red - Low (3.3v - 3.5v)
    2. Purple - Medium (3.5v - 3.7v)
    3. Blue - High (3.7v - 3.9v)
  6. Once you have selected your desired wattage, you are ready to use your eRig!

Using Your eRig

  1. With your desired temperature selected, press the power button 2 times quickly to Activate the 30 Second Heat Up Cycle. The Button will remain lit with the color of the Temp Setting chosen for 30 seconds, then it will light up Green for 10 Seconds.
  2. Depending on your preference on temperature, you can activate your heat up 1 time, 2 times, or 3 times.
    1. Low Temp
      1. Titanium - 1-2 times
      2. Ceramic - 1-2 times
      3. Quartz - 1-2 times
    2. Huge Rips
      1. Titanium - 1-3 times
      2. Ceramic - 2-3 times
      3. Quartz - 1-2 times
  3. Use the included Magnetic Carb Cap & Dabber to pick up the material you want to vaporize. 
  4. Once you find your perfect temperature, wait for the Green Light, place your material into the atomizer, and use the Magnetic Carb Cap to cover the glass bubbler to increase vapor strength and density.
  5. Place your lips on the mouthpiece of the bubbler and inhale softly.
  6. If you wish to stop the Heat Up Cycle, press the power button 2 times.
  7. Repeat Steps 1-5 until completely satisfied.
  8. Alternate Party Method:
    1. Load your material
    2. Cover with your Carb Cap
    3. Press button 2 Times to Activate
    4. Allow 7-10 seconds to heat up, inhale, and pass around while it's activated (40 secs total). 

How to use with a Water Pipe:

Watch a video on how to connect to your Water Pipe

  1. Take apart the bubbler, and connect the Bottom piece upside down on your SOURCE nail XL attachment in comparison to normal use.
  2. Connect the Bottom piece to your favorite 18mm water pipe!

How to use as a Vape Pen

How to Prep and Power On

  1. Attach the SOURCE nail XL globe to your SOURCE nail XL Premium battery.
  2. Remove the Glass Globe and screw your desired SOURCE nail atomizer clockwise unto the SOURCE nail XL Glass Globe attachment.
  3. Fill your SOURCE nail atomizer with the material you'd like to vaporize (we recommend .2g max).
  4. Replace your glass globe.
  5. Press the Power Button on your SOURCE nail XL Premium battery sequentially 5 times to turn on.

Using Your Vape Pen

  1. Select your desired Temp Setting
    1. Red - Low (3.3v - 3.5v)
    2. Purple - Medium (3.5v - 3.7v)
    3. Blue - High (3.7v - 3.9v)
  2. Press the Power Button 2 Times to activate.
  3. Place your lips on the mouthpiece of the glass globe, cover the carb hole on the glass globe with your finger, press and hold the Power Button, and inhale softly
  4. Cover the carb hole on the glass globe with your finger.
  5. Release your finger from the carb hole to increase strength and vapor density.
  6. Press the Power Button 2 times if you finish your material before the Heat Up Cycle ends.
  7. Repeat Steps 1-5 until completely satisfied.

How to Clean

Watch a video on how to Clean your SOURCE nail XL

How to clean your SOURCE nail XL glass

  • Bubbler
    1. Pour 91% isopropyl alcohol into the mouthpiece until the bubbler is 1/4 full of alcohol.
    2. Shake the bubbler carefully until all the residue inside the glass is removed.
    3. Once the inside of the glass is clean, pour water into the mouthpiece until all of the alcohol has be washed off.
    4. To empty out the water, blow out through the mouthpiece and shake gently until all liquid has blown off.
  • Globe
    1. Soak the globe into a container full of 91% isopropyl alcohol, until most material comes off.
    2. Once the glass is mostly clean, remove from a container and gently use a soft cloth to clean and dry the globe.

How to clean your SOURCE nail atomizers

  1. Unscrew the Ring Cap of the SOURCE nail atomizer by holding the atomizer body and twisting the ring counter-clockwise until it comes off.
  2. Gently remove the Bucket inside (Titanium, Ceramic, or Quartz) and submerge both the Bucket and the Ring Cap into a container full of 91% isopropyl alcohol until clean.
  3. Once the Bucket and Ring Cap are clean, use soft cloth to dry the Bucket and Ring Cap while finishing cleaning any remain of the material.
  4. If the outside of the atomizer body needs to be cleaned, use the soft cloth and spot clean with 91% isopropyl alcohol.
  5. Once the Bucket and Ring Cap have dried, gently place back into the atomizer body (make sure to not press down hard!), and screw the Ring Cap clockwise until closed.

How to Charge

  1. Plug a micro USB cable into the battery's charging port.
  2. Plug your cable into a wall charger.
  3. Your battery will light up and the small light next to the charging port will flash red while charging.
  4. The charging indicator light will turn off once fully charged (2-3 hours).
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.