Follow

How do I use my SOURCE nail XL - Premium Kit?

Watch a video on how to use your SOURCE nail XL

How to use as a Portable eNail

How to Fill Your Bubbler

  1. Remove the glass bubbler from the attachment (gently pull from the attachment).
  2. Pour 1/4 oz. of water into the mouthpiece, or until the bubbler is less than 1/4 full.
  3. If some water drops to the bottom chamber of the bubbler, that's ok, but you can tip forward slowly to let the excess water drip down.

How to Prep and Power On

  1. Attach the SOURCE nail XL attachment to your SOURCE nail XL Premium battery.
  2. With the glass bubbler removed and screw your desired SOURCE nail atomizer clockwise unto the SOURCE nail XL attachment.
  3. Replace the glass bubbler after it's filled with water.
  4. Press the Power Button on your SOURCE nail XL Premium battery sequentially 5 times to turn on.
  5. Press the Power Button 4 times quickly to cycle through the Temp Settings. 
    1. Red - Low (3.3v - 3.5v)
    2. Purple - Medium (3.5v - 3.7v)
    3. Blue - High (3.7v - 3.9v)
  6. Once you have selected your desired wattage, you are ready to use your eRig!

Using Your eRig

  1. With your desired temperature selected, press the power button 2 times quickly to Activate the 30 Second Heat Up Cycle. The Button will remain lit with the color of the Temp Setting chosen for 30 days, then it will light up Green for 10 Seconds.
  2. Depending on your preference on temperature, you can activate your heat up 1 time, 2 times, or 3 times.
    1. Low Temp
      1. Titanium - 1-2 times
      2. Ceramic - 1-2 times
      3. Quartz - 1-2 times
    2. Huge Rips
      1. Titanium - 1-3 times
      2. Ceramic - 2-3 times
      3. Quartz - 1-2 times
  3. Use the included Magnetic Carb Cap & Dabber to pick up the material you want to vaporize. 
  4. Once you find your perfect temperature, wait for the Green Light, place your material into the atomizer, and use the Magnetic Carb Cap to cover the glass bubbler to increase vapor strength and density.
  5. Place your lips on the mouthpiece of the bubbler and inhale softly.
  6. If you wish to stop the Heat Up Cycle, press the power button 2 times.
  7. Repeat Steps 1-5 until completely satisfied. 

How to use with a Water Pipe:

Watch a video on how to connect to your Water Pipe

  1. Take apart the bubbler, and connect the Bottom piece upside down on your SOURCE nail XL attachment in comparison to normal use.
  2. Connect the Bottom piece to your favorite 18mm water pipe!

How to use as a Vape Pen

How to Prep and Power On

  1. Attach the SOURCE nail XL globe to your SOURCE nail XL Premium battery.
  2. Remove the Glass Globe and screw your desired SOURCE nail atomizer clockwise unto the SOURCE nail XL Glass Globe attachment.
  3. Fill your SOURCE nail atomizer with the material you'd like to vaporize (we recommend .2g max).
  4. Replace your glass globe.
  5. Press the Power Button on your SOURCE nail XL Premium battery sequentially 5 times to turn on.

Using Your Vape Pen

  1. Select your desired Temp Setting
    1. Red - Low (3.3v - 3.5v)
    2. Purple - Medium (3.5v - 3.7v)
    3. Blue - High (3.7v - 3.9v)
  2. Press the Power Button 2 Times to activate.
  3. Place your lips on the mouthpiece of the glass globe, cover the carb hole on the glass globe with your finger, press and hold the Power Button, and inhale softly
  4. Cover the carb hole on the glass globe with your finger.
  5. Release your finger from the carb hole to increase strength and vapor density.
  6. Press the Power Button 2 times if you finish your material before the Heat Up Cycle ends.
  7. Repeat Steps 1-5 until completely satisfied. 
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.