Follow

SOURCE 10cig v6

10cig_v6.jpg

 

Works with:

  • Atomizers:
    • 10cig v6 and 10cig Pro atomizers
  • Batteries:
    • SOURCE 10cig v6 battery
    • SOURCE orb 3 Premium battery
    • SOURCE orb 4 Premium battery
    • SOURCE orb XL Premium battery
    • SOURCE volt mini battery
    • SOURCE volt nano battery

Includes:

  • 1x SOURCE 10cig v6 Attachment
  • 1x SOURCE 10cig Battery
  • 2x SOURCE 10cig v6 atomizers
  • 1x Small eGo Charger
  • 1x Small Dabbing Tool

Atomizers:

  • 1x 10cig v6 Quartz Single Coil atomizer
  • 1x 10cig v6 Black Ceramic Single Coil atomizer

How to Use & Power On:

  1. Attach the SOURCE 10cig v6 atomizer to your battery.
  2. Fill your atomizer with the material you'd like to vaporize.
  3. Replace the Top of your SOURCE 10cig v6. 
  4. Power On/Unlock your battery by Clicking Sequentially 5 times.
  5. Choose our desired temperature (Low, Medium, or High).
  6. Once your battery powers up, to change Temp Settings between LowMedium, and High, click the button Sequentially 3 times.
  7. Once you have selected your desired temperature, you are ready to use your vape pen!
  8. Place your lips on the mouthpiece of the SOURCE 10cig v6, press and hold the Power Button, and inhale softly. 
  9. Release Power Button when done vaping, and take a few more cool hits to lower the temperature and any material left in the chamber.

How to Change Temperature:

  • To change Temp Settings between LowMedium, and High, click the button Sequentially 3 times.
    • Red light: 3.4V
    • Purple light: 3.4~3.7V
    • Blue light: 3.7~4.2V

How to Clean:

To optimize the performance of your SOURCE 10cig v6 and its atomizers, we recommend cleaning thoroughly whenever needed.

Atomizers and Attachment:

  1. Make sure the battery is not active and locked. 
  2. Unscrew the atomizer from the SOURCE 10cig v6 battery.
  3. Submerge the atomizer a container with 91% isopropyl alcohol.
  4. Shake softly for 3-5 minutes, and allow to air dry completely.
  5. Clean the attachment with a cloth lightly soaked in 91% isopropyl alcohol, scrub the SOURCE 10cig v6 attachment to clean completely.

Battery:

  1. Dip a cotton swab or cloth in 91% isopropyl alcohol, and clean the connection between the battery and the atomizer regularly. 
  2. Keep this clean of sticky material, once it dries and it's connected to either an attachment or a charger, it might pull and damage your battery.

How to Charge:

  1. Unscrew your battery from the SOURCE 10cig v6 Atomizer. 
  2. Check the inside of your battery connector and clean any debris or material with a cotton swab.
  3. Screw your battery onto your small eGo charger (make sure it is dry and clean of any residue).
  4. Plug your charger into a wall charger.
  5. Your battery will light up and your charger will light red while charging.
  6. Your charger will turn solid green once fully charged (1-2 hours).
Was this article helpful?
7 out of 7 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.