Follow

How do I use/clean/charge my SOURCE orb 4 - Premium Kit m2?

SAFETY INFORMATION:

  • Do not leave charging in extreme temperatures (Very Hot or Very Cold)
  • Do not use while charging.
  • Do not charge near moist environments.
  • Do not leave battery hanging by its cable. Make sure it is in a stable position.
  • Do not leave charging for extended periods of time.
  • Charge in a well-ventilated area. 
  • When charging, allow the battery to charge completely prior to use. 

How to Use & Power On

  1. Attach the SOURCE orb 4 m2 attachment to your battery.
  2. Remove the Top of your SOURCE orb 4 m2 attachment and screw your desired atomizer clockwise unto the Base. 
  3. Fill your atomizer with the material you'd like to vaporize.
  4. Replace the Top of your SOURCE orb 4 m2 attachment
  5. Twist the Variable Airflow System (VAS) to your desired airflow.
  6. Power On/Unlock your battery by clicking sequentially 5 times.
  7. Once your battery powers up, you can change the wattage setting by clicking the button sequentially 3 times. 
  8. Once you have selected your desired wattage setting, you are ready to use your vape pen!
  9. Place your lips on the mouthpiece of the SOURCE orb 4 m2, press and hold the Power Button, and inhale softly (allow 5 seconds for Coil-less to warm up).
  10. Release the Power Button when done vaping, and take a few more cool hits to lower the temperature and any material left in the chamber.
  11. For the Auto-Run "Sesh Mode" setting, simply click the button 2 times, and it automatically runs for 15 seconds.

How to Change Wattage Settings

To change the Wattage Setting, click the button sequentially 3 times. For the auto-run feature, click the battery button 2 times. 

  • Blue - 27w
  • Purple - 21w
  • Red - 17w
  • Yellow - 13w
  • Green - 7w

How to Clean

Watch a video on how to clean your 4 Series atomizers

To optimize the performance of your SOURCE orb 4 m2 attachment and its atomizers, we recommend cleaning thoroughly whenever needed.

  • Atomizers
  1. Make sure the battery is not active and locked. 
  2. Unscrew the atomizer from the SOURCE orb 4 m2 attachment.
  3. Submerge the atomizer a container with 91% isopropyl alcohol.
  4. Shake softly for 3-5 minutes, and allow to air dry completely.
  • Attachment
  1. Take apart your SOURCE orb 4 m2 attachment completely.
  2. With a cloth lightly soaked in 91% isopropyl alcohol, scrub the SOURCE orb 4 m2 attachment pieces to clean completely.
  • Battery
  1. Dip a cotton swab or cloth in 91% isopropyl alcohol, and clean the connection between the battery and the attachment regularly. 
  2. Keep this clean of sticky material, once it dries and it's connected to either an attachment or a charger, it might pull and damage your battery.

How to Charge: 

  1. Remove the 14500 removable battery from your SOURCE orb 4 m2 Premium Battery case.
  2. Place your 14500 removable battery to the external charger included in your kit. 
  3. Plug your charger to a power outlet. 
  4. Your charger will light up red while charging. 
  5. Your charger will turn solid green once fully charged (2-3 hours).
Was this article helpful?
3 out of 3 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.